What exactly is the difference between a surge protector and a fuse? Can a fuse protect the electronic devices from lightning instead of surge protector?
12.06.2025 10:17
What does a fuse do?
Upvotes:
There are two important concepts here.
For this case there are devices called Metal oxide varistors (MOV).
2024–09–27 [ Mohan Rajaratnam Mohan Rajaratnam ] . Thinks you can get free electricity from nothing : Mohan Rajaratnam's answer to Is it possible to generate free electricity at home using a magnet or other low-cost methods? If so, how does it work?
One is “what exactly is in a ‘surge protector’ ? ”
Resident Evil surprise return announced by PlayStation - GAMINGbible
At the secondary, it is 1000 times less.)turns ratio). If it gets hit with a 100,000 volt bolt of lightning then the voltage arrestors conduct and clamp the voltage down to line voltage, ( but a small amount leaks down the line). This is the problem.
“ A fuse is a device which protects the (circuit) against overload and short circuit.”
OK, this is Mohan Rajaratnam’s definition of a Surge suppressor.
How Dragonfly will support the search for life on an uninhabitable world - NASASpaceFlight.com -
but I think this circuit , shows a few more pieces.
He then describes the function of a fuse.
A fuse is a non-resetable over current circuit protector.
This is where the MOV conducts again, and dissipated the energy.
This one hit behind the barn.
This is the picture of an electronic coil of wire wound around a core of magnetic material.
Menopause Drug Reduces Breast Cancer Growth In Clinical Trial - ScienceAlert
so, the loop of wire then, when put together with another loop reduces the ‘noise’ on a power line.
so, what happens?
But… the neutral is now “floating” because of the 1 ohm resistance.
Fuses, on their own, then operate much slower than the MOV variable resistance, during the lightning strike.
The other is “what does a “fuse” do?”
a photo is worth a thousand words.
He then describes Rainy Season and Lightning.
Is the question then , "why buy a surge supressor, if the fuse alone protects the electronic circuits from a lightning bolt?".
This device then solves the entire problem.
The Sun Is Causing Starlink Satellites To Drop From Space - Daily Kos
Barnstars:
“ … to protect building, lightning arrestor, is provided above building and directly connected to earth.”
The third is lightning and “how it gets conducted into a home.”
All-time great wrestler Hakuho quits Japan Sumo Association with plans to form global body - AP News
2024–10–00 [ Ammar Mahdi ] Ammar Mahdi
2024–10–16 [ OO OLAOYE OYEBODE ]
First Sentence:
Thomson Reuters Ushers in the Next Era of AI with Launch of Agentic Intelligence - Thomson Reuters
What is lightning?
It also is a device that limits the change in current flow.
Once the voltage goes over 0.0650 volts, then this fact can be used to amplify the difference, and turn the circuit breaker off , furthur down the line. Essentially that is what a RCD/GFCI does, it compares the incoming current, to the outgoing current, and if the difference between the two currents is over 5mA, then it trips the circuit breaker.
Why do narcissists keep calling on the phone after years of separation?
Because the load is inductive, the current lags the voltage.(by a bit).
Can the fuse protect the electronic devices from lightning instead of a surge protector.
So, it’s possible that these devices from Trip Lite have addition suppression devices, these ones seem to be sturdy.
Relativistic jet detected in active galaxy Markarian 110 - Phys.org
eight
One
nine
USMNT vs. Türkiye: Starting XI & Lineup Notes - US Soccer
So combined with a device called a MOV or Metal-oxide-resistor, then forms the 3rd part of a “surge suppressor “.
An AC voltage/ current source, and an ac inductive load.
But during the surge, the fuse will not blow if it is a longer duration and lower value )10 to 50%).
There is no harm in having the surge suppressor along with the fuse in the circuit. The fuse will not open up until the current melts the link. This will take time, and in the interim, that jolt will get transmitted into the power supplies.
So, the voltage could go up to 500 volts, and the fuse will not open up.
This is a high voltage low current spike that comes down the line because of the power poles being struck, and the voltage suppressors activating on the primary side of the transformer.
And this is the problem alone. Is the power supply in the equipmemt designed with a lightning strike in mind? Some yes, others, no.
This is an electronic circuit designed to clamp voltages so that the Voltage Potential that appears at the outlet is never going to exceed the nominal value.
A circuit breaker is similar, but is resettable.
These are simplified answers to the original question, and does not change anything I wrote above.
but this device (an Inductor) … impedes the rapid changes in the current.
[image of Common-mode choke]
2024–10–11 [Bobby Sanchez Bobby Sanchez ].
“ A surge suppressor is the one which is connected at the input supply so that when there is a sudden change voltage it bypasses thereby protecting the (circuit) and electronic components”
2024–10–10[John johnson John Johnson ]
Edit 2024–10.
Now when you have a certain ac resistance, then a current flows in a loop.
Would individual surge supressors have save this equipment? most likely, since the surge supressor would take the jolt instead of the electronic components.
In schematic diagrams this is the symbol for a fuse:
Lightning arrestor is a spark-gap device, and can be installed anywhere. What is important, is that the wire is thick enough to withstand the lightning bolt and conduct the energy away from the building.
At least they know the answer if they wanted it.
Here is a simplified AC power diagram.
But it can get overloaded, and no longer works.
I post the exact comment here.
2024–10–11 [Victor Olarewsju Victor Olarewaju ]
(Dc diagram shown, AC is similar).
He then asserts :
Mohan forgets that a fuse is a one-time device, and needs to be replaced if it is tripped.
When the current is 200% of the rated value , it will “go open” (the link metal melts) and protect the device.
There are three different concepts here that are getting confused.
The MOV will conduct when the voltage exceeds 50% of line voltage.
It seems Mohan does not understand the difference between a comment and an Answer.
what exactly is a ‘surge’ protector?
These devices are installed between the “hot” and “neutral” and protective ground.
If the nominal power is 4,000 watts then the current at 230volts is 16 amps.
2024–10–14 [Omar Gharbi Omar Gharbi ]
(There is no concept of polarity, in the loop because the current changes direction 100 to 120 times a second (power frequency).
It’s been three xxx five werks, and there has been no response to my follow on query on his Commment to my answer.
This is a photo where a lightning bolt took out a home's complete mains distribution box, and a lot of electronic gear as well.
At one ohm, the resistor has a maximum of 1 watt power.
P = e* I, so since I is 16 amps, then the voltage dropped is 1/16 volt or 0.0650 volts.
This is where this question deviates from being a 'generic' question, and becomes more specific.
This is 'the assistant's answer'
the problem then depends on "how fast does the fuse operate?".
The bolt then partially travels down the line to your home.
[old diagram got deleted by accident]